Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 - Manual (Page 21)

3.3 Using the NAS Server’s Printer
1. Find out what printer is connected to the printer port on the NAS.
Use Network Neighborhood (or My Network Places) to locate the NAS, as shown in
Network Browse earlier.
2. Double-click the NAS icon. A printer icon should be shown.
3. Right-click the printer icon, and select Install, as shown above. The Add Printer wizard
will start.
4. Select the Manufacturer and Printer matching the printer connected to the NAS.
5. Follow the prompts to complete the installation.
If prompted about sharing this printer, do NOT enable sharing.
6. The new printer will then appear in your Printer list, and can be used from any Windows
application.
z Use Start - Settings - Printers to list all your printers.
z Double-click the printer to view or delete the documents in the print queue.
z Use File - Set as Default to make the selected printer the default printer.
z Use File - Properties to view or modify the properties of the selected printer.
Note Please make sure the printer is not a GDI interface printer before you connect to
NAS-7200. The print server function is support PCL interface printer only. You may
confirm the interface to your printer provider for the detail information.
20