Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 User Manual
Page 33
The Network Attached Storage can act as a DHCP (Dynamic Host Configuration Protocol)
Server, providing IP Addresses and related data to PCs and other devices.
Enable
Use this to Enable/Disable the DHCP Server. If you already have a DHCP
Sever, do not enable this feature.
Start Address
Enter the beginning of the range of IP Addresses to be allocated by the
DHCP Server.
Finish Address Enter the last address of range of IP Addresses to be allocated by the DHCP
Server.
A DNS (Domain Name Server) translates Internet addresses (e.g. microsoft.com) to IP
Addresses. Use the same values as on your PC, or recommended by your ISP (Internet
Service Provider).
At least one (1) DNS entry is required if using either the "E-Mail Alert" feature.
Otherwise, the DNS entries may be left blank.
Obtain DNS Server
Addresses from
DHCP Server
Select this if you want to obtain DNS Server Addresses from DHCP
server when DHCP Client is enabled.
Use Fixed DNS
Server Addresses
Select this if you want to specify some DNS Server Addresses.
Primary
IP Address of the first DNS Server.
Backup 1
IP Address of the DNS Server to be tried if the first server is busy.
32