Basic installation & setup, 1 network logon (windows 95/98/me only) – Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 User Manual
Page 17
3. Basic Installation & Setup
Supported versions of Windows are:
z
Windows 95/98/ME or later
z
Windows NT 4.0, Windows 2000, Windows 2003, Windows XP and Windows Vista
The following items need to be checked or configured:
z
Network Logon (Windows 95/98/ME only)
z
Locating the NAS on your LAN.
z
Mapping to the NAS Server's storage.
3.1 Network Logon (Windows 95/98/ME only)
If using Windows 95, Windows 98, or Windows ME, you must Logon to the Network correctly
in order to use the NAS.
To check your Network Logon, following this procedure:
Check your Window logon using Start - Settings - Control Panel - Network.
Ensure the Primary Network Logon is set to "Client for Microsoft Networks", as shown below.
Windows will prompt you to Logon to the Network when it starts (boots).
You must logon!
If you press ESC, or click Cancel, no network resources will be available.
When you logon, you need to use a valid User Name and Password. If the NAS Administrator
has defined users on the NAS, use the User Name and password they supply.
16