Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 User Manual
Page 58
S.M.A.R.T. - S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) can warn of
impending problems with the Hard Disk, before it actually fails. This test should be performed
regularly.
S.M.A.R.T.
This can have any of the following values:
z
Not Installed - No disk is available.
z
Not Checked - No S.M.A.R.T. check has been performed on this
drive since system boots up.
z
OK - No errors were found in the last test.
z
Going to fail - The S.M.A.R.T. check found errors on the drive and
the disk is going to fail.
Schedule
Use these fields to set up a schedule to run S.M.A.R.T. check regularly,
if desired. The available options are:
z
Never - S.M.A.R.T. check will not be scheduled to run.
z
Every Day - Select this to have S.M.A.R.T. check to run each day,
at the specified time.
z Every Monday, Every Tuesday, ... - Select this to have the
scandisk run once per week, on the specified day.
Use the time fields (hour, minute, am/pm) to specify when the
S.M.A.R.T. check should be performed.
Standby
Use the "Set Hard Disk to standby mode…" setting to determine if and
when the hard disk drives should be switched to "Standby" mode.
Use the "Turn off the fan…" setting to determine if and when the fan
should be turned off.
57