Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 - Manual (Page 15)

4. The following screen will then be displayed. You can set the IP settings in this screen.
Please click “Next” after the configured.
Obtain an IP
address
automatically
(DHCP Client)
Select this only if your LAN has a DHCP Server.
Fixed IP Address This option is recommended. You need to enter the following
data.
• IP address - The utility will suggest a unused IP address
within the address range used on your LAN. If you wish,
you can change this, but you must ensure the address is
unused.
• Network Mask - This must match the value used by PCs
on your LAN.
• Gateway - This must match the value used by PCs on your
LAN.
5. You can configure the time settings in this screen. Please click “Next” after the configured.
Server Name The Default Name is shown. You may change
this if you wish.
Workgroup
Name Normally, this name should match the
Workgroup name used by PCs on your LAN.
Time Zone Select your time zone from the list.
Local
Date/Time Enter the local date (mm/dd/yyyy format) and
time.
14