Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 - Manual (Page 40)

Environment above.
Allow anonymous
FTP login The FTP server will prompt for a Username and Password when clients
attempt to connect. If this option is Enabled, users will be able to enter
"anonymous" as the Username, and any string as the Password. If this
option is Disabled, users must provide their correct Name and
Password.
Enable SSL Enable SSL encryption support for the FTP server. To use this function,
you must use FTP clients with SSL supported also.
Bandwidth Limit Limit the maximum speed of data transfer for every FTP client. Value
must be equal to or larger than 0. 0 means no limit.
Enable UPnP
Support If enabled, the NAS will broadcast it's availability. For LAN users with
systems which support UPnP (e.g. Windows ME, Windows XP), an icon
for the NAS will be automatically generated.
Enable HTTPS If enabled, you can access the NAS's web pages with HTTPS (HTTP
over SSL). This function can make sure all connections are encrypted
and secure.
Enable Recycle Bin If enabled, deleted files are removed to folders 'Recycle Bin' in every
share. If you want to delete the files permanently, you need delete them
from folders 'Recycle Bin' again.
Clear Recycle Bin
Trimly
Set up a schedule to clear files that exist in the Recycle Bin trimly.
Port Number This port number is used for HTTP (Web Browser) connections to this
Server. The default is 80, as used by Web Servers. If this is changed,
you should use a number greater than 1024 (8080 is often used). Also, if
the port is not 80, you must specify the port in your Web browser, in
order to connect. To do this, add a ":" and the port number after the
address: e.g.
HTTP://192.168.0.100:8080
This example assumes the NAS's IP Address is 192.168.0.100, and the
port number is 8080.
39