Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 - Manual (Page 16)

6. Please check the configured settings of this screen, if all the configure are correct. Please
click “Save” button.
7. After click "Save", you will see the dialog box to prompt you again. Please click “OK” to
save or click “Cancel to check the settings.
8. If you would like to install “Flash-Map” to helps you to mapping NAS now, please click
“Yes” and refer to the manual in our bundled CD disk, otherwise, please click “No” to finish
the configuration, then close the initial utility.
15