Pioneer PDP 427CMX - Manual (Page 218)

218
Integrator Mode
3) COLOR DETAIL setting
1 Enter the integrator mode.
(Refer to section 5.4.1, “About the Integrator Mode” (pg. 214).)
2 Select ‘PICTURE’.
3 Place the cursor on ‘COLOR DETAIL’ then press the [SET]
button.
4 Use the [ 5/∞] buttons to switch between items.
5 Adjustment is performed using the [ 2/3] buttons.
C. DETAIL can be adjusted for each color.
• C. DETAIL RED: The + side approaches magenta, and
the – side approaches yellow.
• C. DETAIL YELLOW: The + side approaches red, and
the – side approaches green.
• C. DETAIL GREEN: The + side approaches yellow, and
the – side approaches cyan.
• C. DETAIL CYAN: The + side approaches green, and
the – side approaches blue.
• C. DETAIL BLUE: The + side approaches cyan, and the
– side approaches magenta.
• C. DETAIL MAGENTA: The + side approaches blue, and
the – side approaches red.
It is possible to move to another item for adjustment using
the [ 5/∞] buttons.
Press the [SET] button to return to screen 3.
Screen 3
I N T E G R AT O R I N P U T 1
ENTER
S C R E E N S E T U P O P T I O N P I C T U R E
: 1 2 8
: 0
: 0
: 1 2 8
SET EXIT MENU
: 2 . 0
C O N T R A S T
B R I G H T N E S S
H . E N H A N C E
V . E N H A N C E
G AMMA
P I C T U R E R E S E T
W H I T E B A L A N C E
C O L O R D E T A I L
Screen 4
ENTER
R E D
Y E L L OW
G R E E N
C Y A N
C . D E T A I L R E S E T
R E T U R N
B L U E
C O L O R D E TA I L
M AG E N T A :
:
:
:
:
:
SET EXIT MENU
3 0
3 0
3 0
3 0
3 0
3 0
Screen 5
:
SET SET EXIT MENU
2 9 R E D