Pioneer PDP 427CMX - Manual (Page 273)

273
RS-232C Adjustment
Command
434CMX
505CMX
Command
425CMX
Command
427CMX
507CMX Function
Number direct
Last
memory
Comment
Effective Minimum Maximum
– BPIS01
+
Sets the BANNER PinP input to INPUT1.
– BPIS02 + Sets the BANNER PinP input to INPUT2.
– BPPS00
+ Sets the BANNER PinP setting to OFF.
– BPPS01 + Sets the BANNER PinP setting to TOP3.
– BPPS02
+ Sets the BANNER PinP setting to MID-HIGH.
– BPPS03 + Sets the BANNER PinP setting to MID-LOW.
– BPPS04
+ Sets the BANNER PinP setting to BOTTOM3.
– + BPPS05 Sets the BANNER PinP setting to TOP2. New
–
+
BPPS06 Sets the BANNER PinP setting to BOTTOM2. New
– + BPPS07 Sets the BANNER PinP setting to TOP1. New
–
+
BPPS08 Sets the BANNER PinP setting to BOTTOM1. New
– + BPPS09 Sets the BANNER PinP setting to LEFT. New
–
+
BPPS10 Sets the BANNER PinP setting to RIGHT. New
– + PFAS00 PIP fade in function ineffective. New
–
+
PFAS01 PIP fade in function effective. New
– + PFAS10 PIP fade in (only when PIP fade in function is effective). New
–
+
PFAS11 PIP fade off (only when PIP fade in function is effective). New
FUNCTION
FDT
+ + Executes FUNCTION DEFAULT.
7 Other commands
Command
434CMX
505CMX
Command
425CMX
Command
427CMX
507CMX Function
Number direct
Last
memory
Comment
Effective Minimum Maximum
DISPLAY CALL
– DITS01 + Displays DISPLAY CALL 1.
– DITS02
+ Displays DISPLAY CALL 2.
– IM0 + INFORMATION write-in (1-3 characters).
– IM1
+ INFORMATION write-in (4-6 characters).
– IM2 + INFORMATION write-in (7-9 characters).
– IM3
+ INFORMATION write-in (10-12 characters).
– IM4 + INFORMATION write-in (13-15 characters).
– IM5
+ INFORMATION write-in (16-18 characters).
– IM6 + INFORMATION write-in (19-21 characters).
– IMD
+ Clears INFORMATION.
AUXILIARY COMMAND
DW0
+ + Subtracts 10 from the adjustment value.
DWF
+ + Minimizes the adjustment value.
DWn
+ + Subtracts n from the adjustment value. (n=1~9)
UP0
+ + Adds 10 to the adjustment value.
UPF
+ + Maximizes the adjustment value.
UPn
+ + Adds n to the adjustment value (n = 1 to 9).
GST QST
+ Obtains status information.
GPI QPI + Obtains integrator/PICTURE information.
GWB QWB + Obtains integrator/WHITE BALANCE information.
GPS QPS
+ Obtains integrator/SCREEN information.
GSS QSS + Obtains SETUP information.
GSO QSO
+ Obtains Menu Integrator/OPTION information.
– QAP + Obtains various machine names.
– QCI
+ Obtains time information.
– QSU + Obtains audio status.
OTHER
– – MRKS00 Sets mark display off. New
– – MRKS01 Sets mark display on. New
– – RMCS10 Remote control key: CURSOR RIGHT New
– – RMCS11 Remote control key: CURSOR LEFT New
– – RMCS12 Remote control key: CURSOR UP New
– – RMCS13 Remote control key: CURSOR DOWN New
– – RMCS14 Remote control key: SET New
– – RMCS25 Remote control key: MENU New