Pioneer PDP 427CMX - Manual (Page 271)

271
RS-232C Adjustment
7 “INTEGRATOR”–“OPTION” related commands
Command
434CMX
505CMX
Command
425CMX
Command
427CMX
507CMX Function
Number direct
Last
memory
Comment
Effective Minimum Maximum
SCREEN MASK
FMK
+ +
Displays the present set value of SCREEN MASK.
FMKS00 + + Sets SCREEN MASK to OFF.
FMKS02
+ + Sets SCREEN MASK to inverse (negative – positive reversed).
FMKS03
+ +
Sets SCREEN MASK to white mask.
FMKS04
+ + Sets SCREEN MASK to red mask.
FMKS05
+ +
Sets SCREEN MASK to green mask.
FMKS06
+ + Sets SCREEN MASK to blue mask.
FMKS07
+ +
Sets SCREEN MASK to yellow mask.
SIDE MASK
RSL
+ +
Adjusts side mask RED. 000 255
GSL
+ + Adjusts side mask GREEN. 000 255
BSL
+ +
Adjusts side mask BLUE. 000 255
–
+
SMAS00 Sets AUTO SIDE MASK to OFF. New
– + SMAS01 Sets AUTO SIDE MASK to ON. New
VIDEO WALL
MGF
+ + Displays the set value of VIDEO WALL.
MGFS00
+ + Sets VIDEO WALL to OFF.
– MGFS11 + Sets VIDEO WALL to DIVIDER:1.
– MGFS12
+ Sets VIDEO WALL to DIVIDER:4.
– MGFS13 + Sets VIDEO WALL to DIVIDER:9.
– MGFS14
+ Sets VIDEO WALL to DIVIDER:16.
– MGFS15 + Sets VIDEO WALL to DIVIDER:25.
MGP + +
Displays the present VIDEO WALL (accounting/not accounting
for expanded position/joints) setting.
MGPSnn
+ + nn=01 to 04: Sets display position during DIVIDER=2 x 2 (not
accounting for joints).
nn=05 to 08: Sets display position during DIVIDER=2 x 2
(accounting for joints).
nn=10 to 18: Sets display position during DIVIDER=3 x 3 (not
accounting for joints).
nn=20 to 28: Sets display position during DIVIDER=3 x 3
(accounting for joints).
nn=30 to 3F: Sets display position during DIVIDER=4 x 4 (not
accounting for joints).
nn=40 to 4F: Sets display position during DIVIDER=4 x 4
(accounting for joints).
nn=50 to 68: Sets display position during DIVIDER=5 x 5 (not
accounting for joints).
nn=70 to 88: Sets display position during DIVIDER=5 x 5
(accounting for joints).
– IDA
+ Executes AUTO ID setting.
– PDES00 + Sets POWER ON DELAY mode to OFF.
– PDES01 +
Sets POWER ON DELAY mode to ON (other than cases used for
a higher than 16 screen system) or mode 1 (used for a higher
than 16 screen system).
– PDES02
+ Sets POWER ON DELAY mode 2 (used for a higher than 16
screen system).
– LNKS00
+ Sets ABL link to OFF.
– LNKS01 + Sets ABL link to ON.
RS-232C
BRA
+ +
Displays the present set value of baud rate.
BRAS01
+ + Sets the RS-232C baud rate to 1200 bps.
BRAS02
+ +
Sets the RS-232C baud rate to 2400 bps.
BRAS03
+ + Sets the RS-232C baud rate to 4800 bps.
BRAS04
+ +
Sets the RS-232C baud rate to 9600 bps.
BRAS05
+ + Sets the RS-232C baud rate to 19200 bps.
BRAS06
+ +
Sets the RS-232C baud rate to 38400 bps.
ID NUMBER
IDC
+ +
Clears the ID number.
IDS
+ + Sets the ID number.