Pioneer PDP 427CMX - Manual (Page 268)

268
RS-232C Adjustment
Command
434CMX
505CMX
Command
425CMX
Command
427CMX
507CMX Function
Number direct
Last
memory
Comment
Effective Minimum Maximum
MSTS06 + + Sets the MULTI SCREEN to PoutP (side by side, 2-L).
– MSTS08 +
Sets MULTI SCREEN to SWAP (switches between main
and sub screens).
– MSTS09
+ Sets MULTI SCREEN to PoutP (side by side 2-R).
– MSTS10 + Sets MULTI SCREEN to 2-SCREEN (side by side 3).
– MSTS11 + Sets MULTI SCREEN to PoutP (side by side 4-L).
– MSTS12 + Sets MULTI SCREEN to PoutP (side by side 4-R).
SSI + + Displays the present input to the SUB Screen.
FUNCTIONAL LOCK
FCL
+ + Displays the present set value of the FUNCTIONAL LOCK.
FCLS00 + + Cancels FUNCTIONAL LOCK.
FCLS01
+ + Prohibits operation of buttons on the display.
FCLS02 + + Prohibits operation of buttons on the remote control.
FCLS03
+ + Prohibits operation of buttons on the display/remote control.
FCLS04 + + Sets the memory lock
OSD
DOF
+ +
Turns off the OSD display that is now displayed.
7 “MENU”–“SETUP” related commands
Command
434CMX
505CMX
Command
425CMX
Command
427CMX
507CMX Function
Number direct
Last
memory
Comment
Effective Minimum Maximum
COLOR TEMP.
CTP
+ + Displays the present set value of the color temperature.
CTPS01 + + Sets the color temperature to LOW.
CTPS02
+ + Sets the color temperature to MID LOW.
CTPS03 + + Sets the color temperature to MIDDLE.
CTPS04
+ + Sets the color temperature to MID HIGH.
CTPS05 + + Sets the color temperature to HIGH.
DNR
DNR + + Displays the present set value of the DNR.
DNRS00 + + Sets digital NR to OFF.
DNRS01
+ + Sets digital NR to LOW.
DNRS02 + + Sets digital NR to MIDDLE.
DNRS03
+ + Sets digital NR to HIGH.
MPEG NR
MNR
+ + Displays the present set value of the MPEG NR.
MNRS00 + + Sets MPEG NR to OFF.
MNRS01
+ + Sets MPEG NR to LOW.
MNRS02 + + Sets MPEG NR to MIDDLE.
MNRS03
+ + Sets MPEG NR to HIGH.
CTI
CTR + + Displays the present set value of CTI.
CTRS00
+ +
Sets CTI to OFF.
CTRS01 + + Sets CTI to ON.
PURE CINEMA
PUC + + Displays the present set value of PURE CINEMA.
PUCS00
+ + Sets PURE CINEMA to OFF.
PUCS01 + + Sets PURE CINEMA to STANDARD.
COLOR DECORDING
MCD + + Displays the present color decoding.
MCDS01
+ + Sets COLOR DECORDING to RGB (VIDEO).
MCDS02 + + Sets COLOR DECORDING to COMPONENT1 (YCbCr).
MCDS03
+ + Sets COLOR DECORDING to COMPONENT2 (YPbPr).
COLOR SYSTEM
CLS
+ + Displays the present set value of the color system.
CLSS01 + + Sets color system to AUTO.
CLSS02
+ + Sets color system to NTSC.
CLSS03 + + Sets color system to PAL.
CLSS04
+ + Sets color system to SECAM.