Pioneer PDP 427CMX - Manual (Page 81)

81
7 PDA-5004
Video-related
INPUT1 Input The following signal is supported only when a PDA-5004 is installed.
• Component video signal
Y ........................ 1 Vp-p/75
Ω/negative sync.
P
B
/C
B
, P
R
/C
R
........ 0.7 Vp-p (color 100 %)/75 Ω
INPUT2 Input DVI-D 24-pin connector
Digital video signal (HDCP supported)
INPUT3 Input S-VIDEO jack (Mini-DIN, 4-pin connector)
• Y/C separate video signal
Y ........................ 1 Vp-p/75
Ω/negative sync.
C ........................ 0.286 Vp-p/75 Ω (NTSC)
0.3 Vp-p/75 Ω (PAL)
INPUT4 Input RCA jack
• Composite video signal ........ 1 Vp-p/75 Ω/negative sync.
Output RCA jack .................................. 75 Ω/with buffer
INPUT5 Input RCA jack
• RGB ................... 0.7 Vp-p/75 Ω/no sync.
SYNC ON G ....... 1 Vp-p/75 Ω/negative sync.
• Component video signal
Y ........................ 1 Vp-p/75 Ω/negative sync.
P B /C B , P R /C R ........ 0.7 Vp-p (color 100 %)/75 Ω
Audio-related
Input AUDIO INPUT (for INPUT3)
Pin jack ( ×2)
L/R ............ 500 mVrms/more than 10 k Ω
AUDIO INPUT (for INPUT4)
Pin jack ( ×2)
L/R ............ 500 mVrms/more than 10 k Ω
AUDIO INPUT (for INPUT5)
Pin jack ( ×2)
L/R ............ 500 mVrms/more than 10 k Ω
Accessories
Label for remote control unit ............................... × 1
Connector indicator label .....................................
× 1
Screws (3 Ч 8) ..................................................... Ч 2
Operating instructions ......................................... × 1
Warranty .............................................................. × 1
Video Card: PDA-5003/PDA-5004 [507CMX : 427CMX]