Pelco CM6700 - Manual (Page 27)

Pelco Manual C523M-H (6/05) 27
Table B. Programming the CM6700 Switching Control Unit (Continued)
Step 5 (Continued)
Function Action Result
r. Use F1 and F2 to select the desired style (DD-MM-YY,
MM-DD-YY, DD-MMM-YY and MMM-DD-YY).
s. Move down to the TYPE field.
t. Use F1 and F2 to select the desired type (12 HOUR
or 24 HOUR).
u. Move down to the SET CLOCK field.
v. Check all your entries. If any fields are incorrect,
move to them, enter the corrections, and move
back to the SET CLOCK field.
w. When you are ready to set the time, mark time and
pan right when the new time in the TIME field arrives.
x. Go to another step or press 9 to exit.
The selected style flashes.
The TYPE field flashes.
The selected type flashes.
The SET CLOCK field flashes.
The SET CLOCK field flashes.
The clock begins running from the new time.
The Main Menu appears.