Pelco CM6700 - Manual (Page 31)

Pelco Manual C523M-H (6/05) 31
Table B. Programming the CM6700 Switching Control Unit (Continued)
Step 7 (Continued)
Function Action Result
n. Use the sequence and macro keys (KBD100) or pan
and tilt to move through the matrix and use the
keypad to assign the presets for each MON/CAM
entry.
o. When you have completed all entries, move down to
RETURN.
p. Pan right.
q. To program Alarm Input 18, Macro 2, go to step r.
To exit go to step t.
r. Pan right.
s. Repeat steps d through q for Alarm Input 18, Macro 2.
t. Move down to the RETURN field at the bottom of the
screen.
u. Pan right.
v. Move down to the RETURN field at the bottom of the
screen.
w. Pan right.
x. Go to another step or press 9 to exit.
Each entered value flashes.
The R in RETURN flashes.
The Alarm Input 17 (or 18) Macro 1 (or 2) screen
appears. The number 17 (or 18) flashes.
The Alarm Input 18 Macro 2 screen appears. The
number 18 flashes.
The R in RETURN flashes.
The Set Alarm Input screen appears.
The R in RETURN flashes.
The Main Menu appears.