Pelco CM6700 - Manual (Page 34)

34 Pelco Manual C523M-H (6/05)
Table B. Programming the CM6700 Switching Control Unit (Continued)
Step 10
Function Action Result
a. Enter the Main Menu.
b. Press 8.
c. Pan right.
d. Use the F1 and F2 keys to toggle the keyboard 1/
monitor 1 access entry.
e. Use the sequence and macro keys (KBD100) or pan
and tilt to move through the matrix. Use F1 and F2
to assign the desired value for each keyboard/
monitor combination and preset enable.
f. When you have completed all entries, move down to
RETURN.
g. Pan right.
h. To continue with Access programming, go to step c.
Otherwise continue with the next step.
i. Move down to the RETURN field.
j. Pan right.
k. Go to another step or press 9 to exit.
Program
Keyboard Access
Access determines
which keyboards
have access to
which monitors and
if presets can be
programmed.
The Main Menu appears.
The Access screen appears. Access is pro-
grammed in three groups. The group 1 (Keyboard
to Monitor) number flashes.
The Keyboard to Monitor Access matrix screen
appears. The entry for KBD 1/MONITOR 1 flashes.
The selected value flashes.
The selected values flash.
The R in the RETURN field flashes.
The Access screen appears.
The R in RETURN flashes.
The Main Menu appears.
PROCEDURE METHOD
Enable/disable each
keyboard's ability to
control the monitors
(Y/N).
Enable/disable each
keyboard's ability to
program a preset
(Y/N).
F1/F2
F1/F2
ACCESS
1. KEYBOARD TO MONITOR
2. MON TO CAMERA 1-10
3. MON TO CAMERA 11-16
RETURN
KBD TO MONITOR ACCESS
KBD MONITOR PRESET
RETURN
1 2 3 4 ENABLE
1 Y Y Y Y Y
2 Y Y Y Y Y
3
4
5
6
7
8
Y Y Y Y Y
Y Y Y Y Y
Y Y Y Y Y
Y Y Y Y Y
Y Y Y Y Y
Y Y Y Y Y