Pelco CM6700 - Manual (Page 29)

Pelco Manual C523M-H (6/05) 29
Table B. Programming the CM6700 Switching Control Unit (Continued)
Step 6 (Continued)
Function Action Result
o. Pan right.
p. Move down to the ALM ENABLE 9 field.
q. Repeat steps e through l for alarms 9 through 16.
Then go to step r.
r. Move down to RETURN.
s. Pan right.
t. To program the macros (inputs 17 and 18), go to
step 7c.
u. Move down to RETURN and pan right to go back to
the Main Menu.
v. Go to another step or press 9 to exit.
The Set Alarm Input 9-16 screen appears. 9-16
flashes. The screen changes to show alarms 9-16.
The entry in the ENABLE field flashes.
The R in RETURN flashes.
The Set Alarm Input screen appears.
The Main Menu appears.