Pelco CM6700 - Manual (Page 30)

30 Pelco Manual C523M-H (6/05)
Table B. Programming the CM6700 Switching Control Unit (Continued)
Step 7
Function Action Result
Program a. Enter the Main Menu.
Alarms 17 & 18
b. Press 4.
c. Press 2.
d. Move down to the ENABLE field.
e. Use the F1 and F2 keys to toggle the Alarm Enable
field (* = ON, -- = OFF). If you selected OFF go to
step q. Otherwise go to the next step.
f. Pan right.
g. Use the F1 and F2 keys to toggle the Alarm TYPE
field (NO = normally open contacts, NC = normally
closed contacts).
h. Move down to the MON1/CAM1 field in the Macro
matrix.
i. The entry indicates which camera will be displayed
first on monitor number 1 when the Macro alarm is
activated. Use the keypad to enter the desired
camera number.
j. Use the pan and tilt to move through the matrix and
assign the cameras to the sequence for each monitor.
If a monitor is not to be included in the sequence,
enter all zeros.
k. When you have completed all entries, move down to
MACRO PRESET MENU.
l. Pan right.
m. The entry indicates which preset will be assumed by
the MON1/CAM1 camera when the Macro alarm is
activated. Use the keypad to enter the desired preset
number.
The Main Menu appears.
The Set Alarm Input screen appears. Alarms are
programmed in two groups. The Group 1 (INPUT 1-
16) number flashes.
The Set Alarm Input 17 screen appears. The number
17 flashes.
The entry in the ENABLE field flashes.
The selected value flashes.
The entry in the TYPE field flashes.
The selected value flashes.
The entry in the MON1/CAM1 field flashes.
The entered value flashes.
The selected value flashes.
Each selected value flashes.
The M in MACRO PRESET MENU flashes.
The Macro 1 (or 2) Presets screen appears.
The entry in the MON1/CAM1 field flashes.
The entered value flashes.
PROCEDURE METHOD
PROCEDURE METHOD
F1/F2
F1/F2
Keypad
MON CAM1 CAM2 CAM3 CAM4 Turn alarm on/off
(*/--).
Select alarm source Type
(NO, NC).
Assign 4 inputs for each
monitor to sequence.
Assign Preset
for each input
in sequence.
F1/F2 Select 17 or 18.
SET ALARM INPUT
1. INPUT 1-16
2. INPUT 17 AND 18
RETURN
ALARM INPUT XX
MACRO X
ENABLE: -- TYPE: NO
MACRO PRESET MENU
RETURN
1 01 02 03 04
2 05 06 07 08
3 09 10 11 12
4 13 14 15 16
MACRO X
PRESETS
MON CAM1 CAM2 CAM3 CAM4
PRE PRE PRE PRE
1 00 00 00 00
2
3
00 00 00 00
00 00 00 00
00 00 00 00
RETURN
Keypad
(Continued on next page)