Pelco CM6700 - Manual (Page 35)

Pelco Manual C523M-H (6/05) 35
Table B. Programming the CM6700 Switching Control Unit (Continued)
Step 11
Function Action Result
Program a. Enter the Main Menu.
Camera Access
b. Press 8.
Access determines
which camera
images are shown
on which monitors.
c. Move down to the group 2 (MON TO CAMERA 1-10)
field.
d. Pan right.
e. Use the F1 and F2 keys to toggle the monitor 1/
camera 1 access entry.
f. Use the sequence and macro keys (KBD100) or pan
and tilt to move through the matrix. Use F1 and F2
to assign the desired value for each keyboard/
monitor combination.
g. When you have completed all entries, move down to
RETURN.
h. Pan right.
i. To program group 3 go to step j. Otherwise go to step l.
j. Move down to the group 3 (MON TO CAMERA 11-
16) field.
k. Repeat steps d through i for group 3.
l. Move down to the RETURN field.
m. Pan right.
n. Go to another step or press 9 to exit.
The Main Menu appears.
The Access screen appears. Access is pro-
grammed in three groups. The group 1 (Keyboard
to Monitor) number flashes.
The group 2 number flashes.
The Monitor to Camera Access matrix screen
appears. The entry for MON 1/CAMERA 1 flashes.
The selected value flashes.
The selected values flash.
The R in the RETURN field flashes.
The Access screen appears. The group 1
(Keyboard to Monitor) number flashes.
The group 3 number flashes.
The R in RETURN flashes.
The Main Menu appears.
PROCEDURE METHOD
Enable/disable each
monitor's ability to display
the image from each camera
(Y/N). F1/F2
ACCESS
1. KEYBOARD TO MONITOR
2. MON TO CAMERA 1-10
3. MON TO CAMERA 11-16
RETURN
MON TO CAMERA ACCESS
RETURN
MON CAMERA
12 3 4 5 6 7 8 9 10
1 Y Y Y Y Y Y Y Y Y Y
2 Y Y Y Y Y Y Y Y Y Y
3 Y Y Y Y Y Y Y Y Y Y
4 Y Y Y Y Y Y Y Y Y Y
Step 12
Function Action Result
Program Refer to your keyboard manual.
Presets,
Patterns, and
Zones
Programming is completed.