Proxim ORINOCO AP-2000 - Manual (Page 113)

113
Performing Commands
Update AP via HTTP
Use the Update AP via HTTP tab to download Configuration, AP Image, Bootloader files, and Certificate and Private
Key files to the AP.
Once on the Update AP screen, click on the via HTTP tab.
Figure 6-4 Update AP via HTTP Command Screen
The Update AP via HTTP tab shows version information and allows you to enter HTTP information as described
below.
•
Select the File Type that needs to be updated from the drop-down box. Choices include:
–
Config for configuration information, such as System Name, Contact Name, and so on.
– Image for the AP Image (executable program).
– Upgrade BSPBL: for the Bootloader software.
– SSL Certificate: the digital certificate for authentication in SSL communications.
– SSL Private Key: the private key for encryption in SSL communications.
– SSH Public Key: the public key in SSH communications. Refer to Secure Shell (SSH) for more information.
– SSH Private Key: the private key in SSH communications. Refer to Secure Shell (SSH) for more information.
– CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This file will be executed by
the AP immediately after being uploaded. Refer to
CLI Batch File for more information.
Use the Browse button or manually type in the name of the file to be downloaded (including the file extension) in the
File Name field. If typing the file name, you must include the full path and the file extension in the file name text box.
To initiate the HTTP Update operation, click the Update AP button.
A warning message gets displayed that advises the user that a reboot of the device will be required for changes to take
effect.