Introduction, Document conventions, Introduction to wireless networking – Proxim ORINOCO AP-2000 User Manual
Page 12: 1 introduction
12
1
Introduction
•
•
Introduction to Wireless Networking
•
•
Management and Monitoring Capabilities
Document Conventions
•
The term, AP, refers to an Access Point.
•
The term, 802.11, is used to describe features that apply to the 802.11a, 802.11b, and 802.11g wireless standards.
•
A Dual-radio AP is an Access Point that includes two radios; it can support one or two IEEE radio standards
(depending on the type of radios installed). The AP-2000 is a Dual-radio AP.
•
An 802.11a AP is an Access Point that supports the IEEE 802.11a standard.
•
An 802.11b AP is an Access Point that supports the IEEE 802.11b standard.
•
An 802.11b/g AP is an Access Point that supports the IEEE 802.11g standard.
•
Blue underlined text indicates a link to a topic or Web address. If you are viewing this documentation on your
computer, click the blue text to jump to the linked item.
NOTE
A Note indicates important information that helps you make better use of your computer.
CAUTION
!
A Caution indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
Introduction to Wireless Networking
An AP extends the capability of an existing Ethernet network to devices on a wireless network. Wireless devices can
connect to a single Access Point, or they can move between multiple Access Points located within the same vicinity.
As wireless clients move from one coverage cell to another, they maintain network connectivity.
To determine the best location for an Access Point, Proxim recommends conducting a Site Survey before placing the
device in its final location. For information about how to conduct a Site Survey, contact your local reseller.
Before an Access Point can be configured for your specific networking requirements, it must first be initialized. See
for details.