Proxim ORINOCO AP-2000 - Manual (Page 95)

95
Performing Advanced Configuration
Figure 4-31 SSID, VLAN, and Security Data Configuration (VLAN Protocol Disabled)
8. Enable or disable RADIUS accounting on the VLAN/SSID under the Accounting Status drop-down menu.
9. Enable or disable RADIUS MAC authentication status on the VLAN/SSID under the RADIUS Authentication
Status drop-down menu.
10. Enable or disable MAC Access Control List status on the VLAN/SSID under the MAC ACL Status drop-down
menu.
11. Enter the Rekeying Interval in seconds. The default interval is 900 seconds.
12. Enter the Security Profile used by the VLAN in the Security Profile field. Refer to the
Security Profiles section for
more information.
NOTE
If you have two or more SSIDs per interface using a security Profile with a security mode of Non Secure, be
aware that security being applied in the VLAN is not being applied in the wireless network.