Proxim ORINOCO AP-2000 - Manual (Page 93)

93
Performing Advanced Configuration
Wireless-A and Wireless-B
Each SSID/VLAN can have its own Security Profile that defines its security mode, authentication mechanism, and
encryption, so that customers can have multiple types of clients (non-WEP, WEP, 802.1x, WPA) on the same system,
but separated per VLAN. Refer to the
Security Profiles section for more information. These parameters are
configurable from the Wireless A and Wireless B sub-tabs.
Adding or Modifying an SSID/VLAN with VLAN Protocol Disabled
1. Click on SSID/VLAN/Security > Wireless-A or Wireless-B.
This tab allows you to select the index of the SSID/VLAN to be added or edited. It also allows you to configure the
RADIUS Accounting and Authentication Status, the MAC ACL Status, the Rekeying Interval, the Security Profile,
and the RADIUS Server Profiles for the VLAN.
2. Scroll down to the SSID and VLAN table
3. Click Add to configure additional SSIDs, VLANs, and their associated security profiles and RADIUS server
profiles, or click Edit to modify an existing VLAN/SSID. See Figure 4-28 .
Figure 4-28 SSID and VLAN Table
The Add Entry or Edit Entry screen appears. See Figure 4-29 and Figure 4-30 on page 94 .
Figure 4-29 SSID/VLAN Add Entries Screen (VLAN Protocol Disabled)