Ethernet interface, Serial port interface, Active ethernet interface – Proxim ORINOCO AP-2000 User Manual
Page 185: Http interface, Radio specifications, Specifications
185
Specifications
Electrical Specifications
Without Active Ethernet Module
Voltage = 100 to 240 VAC (50-60 Hz)
Current = 0.2 amp
Power Consumption = 20 Watts
With Active Ethernet Module
Input Voltage = 42 to 60 VDC
Output Current = 200mA at 48V
Power Consumption = 9-10 Watts
Environmental Specifications
AP-2000 Unit
Operating = 0° to 40°C (32° to 104 °F) @ 20 to 90% relative humidity
Transport = -40° to 60°C (-40° to 140°F) @ 15 to 95% relative humidity (no condensation allowed)
Storage = -10° to 60°C (14° to 140°F) @ 10 to 90% relative humidity (no condensation allowed)
802.11a Antenna Adapter
Operating = 0° to 70°C (32° to 158 °F) @ 20 to 90% relative humidity
Transport = -40° to 75°C (-40° to 167 °F) @ 15 to 95% relative humidity
Storage = -20° to 75°C (-4° to 167 °F) @ 10 to 95% relative humidity
Ethernet Interface
10/100 Base-TX, RJ-45 female socket
Serial Port Interface
Standard RS-232C interface with DB-9, female connector
Active Ethernet Interface
Category 5, foiled, twisted pair cables must be used to ensure compliance with FCC Part 15, subpart B,
Class B requirements
Standard 802.3af pin assignments
HTTP Interface
•
Microsoft Internet Explorer 6 with Service Pack 1 or later
•
Netscape 6.1 or later
Radio Specifications
•
•
•
•
NOTE
Refer to the Regulatory Flyer included with the AP for the latest regulatory information.