Proxim ORINOCO AP-2000 - Manual (Page 168)

168
Using the Command Line Interface (CLI)
RADIUS Based Management Access Parameters
The RADIUS Based Management Access parameters allow you to enable HTTP or Telnet Radius Management
Access, enable or disable local user access, and configure the local user password.
The default local user ID is root and the default local user password is public. “Root” cannot be configured as a valid
user for RADIUS based management access when local user access is enabled.
SSH Parameters
The following commands enable or disable SSH and set the SSH host key.
The AP SSH feature, open-SSH, confirms to the SSH protocol, and supports SSH version 2.
The following SSH clients have been verified to interoperate with the AP’s server. The following table lists the clients,
version number, and the website of the client.
For key generation, only the OpenSSH client has been verified.
Name Type Values Access CLI Parameter
Radius Local User Status Integer Enable
Disable RW radlocaluserstatus
Radius Local User Password DisplayString User Defined RW radlocaluserpasswd
HTTP Radius Management
Access Integer Enable
Disable RW httpradiusmgmtaccess
Telnet Radius Management
Access Integer Enable
Disable RW telradiusmgmtaccess
Name Type Values Access CLI Parameter
SSH Status Integer Enable
Disable RW sshstatus
SSH Public Host Key Fingerprint DisplayString User Defined RW sshkeyfprint
SSH Host Key Status Integer Create
Delete RW sshkeystatus
Clients Version Website
OpenSSH V3.4-2 http://www.openssh.com
Putty Rel 0.53b http://www.chiark.greenend.org.uk
Zoc 5.00 http://www.emtec.com
Axessh V2.5 http://www.labf.com