Proxim ORINOCO AP-2000 - Manual (Page 18)

18
Getting Started
Hardware Installation
• AP-2000 with Active Ethernet
• AP-2000 with Power Supply
• 5 GHz or AP-2000 11a Upgrade Kit
AP-2000 with Active Ethernet
1. Slide the AP module onto the mounting bracket. Make sure it is properly seated.
Figure 2-1 Insert Module into Mounting Bracket
2. Slide an 802.11b, 802.11b/g wireless card, or 802.11a card with antenna adapter (not included in the kit) into Slot A
or B. NOTE: The 802.11a wireless card with antenna adapter will only fit in Slot A.
3. Slide an 802.11b or an 802.11b/g wireless card (included in the kit) into Slot A or B.
Figure 2-2 Slide a PC Card into the AP
4. Connect power to the unit from a DC injector device, such as the ORiNOCO 1-Port Active Ethernet DC Injector
hub.
5. Wait for the LED indicators to turn green before proceeding.