Pioneer SUPERTUNERD AVIC-N5 - Manual (Page 107)

Selecting an XM channel directly
You can select an XM channel directly by en-
tering the desired channel number.
1 Touch [Direct].
2 Touch 0
— 9 to input the desired chan-
nel number.
To cancel the input numbers, touch [
Clear].
3 While the input number is displayed,
touch [Enter].
The entered XM channel is selected.
4 Touch [Back].
You can return to the previous display.
Using the MyMix function
The MyMix function memorizes the song title
and artist name of the song currently being re-
ceived. When a track that matches the memor-
ized song title and artist name is being
broadcast on a station other than the one you
are listening to, you will be alerted, and you
can switch the station to listen to that song.
p A track itself is NOT downloaded BUT only
the song title and the artist name are mem-
orized.
Memorizing the song title and the
artist name of a song
The song title and artist name of the song you
are listening to can be memorized.
% Touch [Memo].
The song title and artist name of the song you
are listening to are memorized, and a confir-
mation message appears.
p Up to 12 song titles and artist names can be
memorized. Trying to save more than
12 tracks will overwrite old ones.
p You cannot memorize the song title or the
artist name when
“– – – – – – – –” is dis-
played on the title information.
p You cannot memorize the song title or the
artist name of the channel 000.
p There is a possibility the memorized title is
not displayed correctly.
When the memorized track is broadcast
A beep sounds, and a message is displayed.
Touch [
Yes] to switch to that station and listen
to that track.
p If the memorized track is not selected in
the MyMix list, no notification will be pro-
vided even when that track is broadcast.
p Notification may not be provided depend-
ing on the situation of the Navigation Sys-
tem.
= Refer to Setting the notification of memor-
ized tracks on the next page.
p If there is slight difference between the
memorized title and the title of the track
being broadcast, no notification will be pro-
vided even though they are the same song.
Using the direct traffic
announcement function
You can listen to a memorized traffic channel
by directly calling it up with the
TRFC touch
key.
Memorize a traffic channel
1 Tune in to a Traffic channel.
2 Touch and hold [TRFC] for two seconds
or more.
The traffic channel will be memorized.
p The channels 000 and 001 can not be mem-
orized (although the channel 001 is the de-
fault).
Calling up the memorized traffic channel
% Touch [TRFC].
p You can also perform this operation by
touching [ TRAFFIC] in the AV source
screen.
p You can call up a traffic channel from
sources other than XM.
p To cancel traffic announcement, touch
[ TRFC Off].
Using the AV Source (Pioneer AV Equipment)
En
107
Chapter
08
Using
the
A
V
Source
(Pioneer
A
V
Equipment)