Pioneer SUPERTUNERD AVIC-N5 - Manual (Page 32)

— When the ignition switch is turned ON
again (or turned to ACC), the LCD panel
will open automatically.
— Removing or attaching the front panel
will automatically close or open the LCD
panel.
= For details concerning operations, refer
to Removing the front panel on the next
page.
p When the ignition switch is turned OFF
after the LCD panel has been closed, turn-
ing the ignition switch ON again (or turning
it to ACC) will not open the LCD panel. In
this case, press
OPEN/CLOSE button to
open the LCD panel.
p When closing the LCD panel, check to
make sure that it has closed completely. If
the LCD panel has stopped halfway, leaving
it like this could result in damage.
% Press OPEN/CLOSE button to close the
LCD panel.
p To open the LCD panel, press OPEN/CLOSE
button again.
Setting the LCD panel
Adjusting the LCD panel angle
1 Press and hold OPEN/CLOSE button.
Flap Setup screen appears.
2 Press o or p button to adjust the
LCD panel to an easily viewable angle.
The LCD panel angle continues changing as
long as you keep pressing and holding o or
p button.
3 Touch [ESC].
When Flap Setup screen is displayed during
the navigation screen, the map screen is dis-
played. When
Flap Setup screen is displayed
during the AV screen, the current AV operation
screen is displayed.
p If you can hear the LCD panel knocking
against your vehicle
’s console or dash-
board, press o button to move the LCD
panel slightly forward.
p When adjusting the LCD panel angle, be
sure to press o or p button. Manually
adjusting the LCD panel by hand may da-
mage it.
p The adjusted the LCD panel angle will be
memorized and LCD panel will automati-
cally return to this angle the next time the
LCD panel is opened.
Setting the slide back function
You can adjust the LCD panel slide position to
prevent the display from hitting the shift lever
of an automatic vehicle when it is in P (park)
position.
p Please be careful, as LCD panel will slide
immediately after the setting is turned
[
On].
Basic Operation
En
32
Chapter
02