Pioneer SUPERTUNERD AVIC-N5 - Manual (Page 174)

! The LCD screen will be difficult to see if it is
exposed to direct sunlight.
! When using a cellular phone, keep the an-
tenna of the cellular phone away from the
LCD screen to prevent disruption of the
video by the appearance of spots, colored
stripes, etc.
Keeping the LCD screen in good
condition
! When removing dust from the LCD screen
or cleaning the LCD screen, first turn the
system power off, then wipe with a soft dry
cloth.
! When wiping the LCD screen, take care not
to scratch the surface. Do not use harsh or
abrasive chemical cleaners.
Small fluorescent tube
! A small fluorescent tube is used inside the
display to illuminate the LCD screen.
— The fluorescent tube should last for ap-
proximately 10 000 hours, depending on
operating conditions. (Using the naviga-
tion unit at low temperatures reduces
the service life of the fluorescent tube.)
— When the fluorescent tube reaches the
end of its useful life, the LCD screen will
be dark and the image will no longer be
projected. If this happens, consult your
dealer or the nearest authorized Pioneer
service station.
Route Setting Information
Route search specifications
Your navigation system sets a route to your
destination by applying certain built-in rules to
the map data. This section provides some use-
ful information about how a route is set.
CAUTION
When a route is calculated, the route and voice
guidance for the route are automatically set.
Also, for day or time traffic regulations, only infor-
mation about traffic regulations at the time when
the route was calculated is shown. One-way
streets and street closures may not be taken into
consideration. For example, if a street is open dur-
ing the morning only, but you arrive later, it would
be against the traffic regulations so you cannot
drive along the set route. When driving, please
follow the actual traffic signs. Also, the system
may not know some traffic regulations.
About singular route calculation
When the calculation of only one route is set,
you can search a route option by combining
the following conditions.
For details concerning operations, refer to
Modifying the Route Calculation Conditions on
page 59.
For example, when [
Fast] and [Avoid Free-
way] ([On]) are combined, a route that avoids
freeways and has the shortest travel time will
be calculated and displayed on the screen.
Condition 1: whether to put priority on dis-
tance or time
Short:
Calculate a route with the shortest distance to
your destination as a priority.
Fast:
Calculate a route with the shortest travel time
to your destination as a priority.
Condition 2: whether to use freeway or not
Avoid Freeway:
Calculate a route that avoids freeways. (A
route using the freeway may be set if your des-
tination is far away.)
Appendix
En
174
Appendix