Pioneer SUPERTUNERD AVIC-N5 - Manual (Page 130)

Operate the external unit by
using 1 KEY
— 6 KEY
The external unit can be operated by transmit-
ting the operating commands set to
1 KEY
—
6 KEY.
p Operation varies depending on the external
unit connected. (In some cases, the exter-
nal unit may not respond.)
% Touch desired key ([1 KEY] — [6 KEY])
to operate the external unit.
Operate the external unit by
using F1
— F4
The external unit can be operated by transmit-
ting the operating commands set to
F1 — F4.
p The operating commands set to F1 — F4
vary depending on the external unit.
p Some functions may not be used until you
touch and hold the key.
% Touch [F1] — [F4].
The operation command is transmitted to the
external unit.
Switching the automatic and
manual function
You can turn automatic and manual function
on or off.
You can switch between
Auto and Manual
functions of the external unit connected.
Initially, this function is set to
Auto.
p Operating commands set for Auto and
Manual operations vary depending on the
external unit connected.
% Touch [A/M].
Touching [
A/M] switches between [Auto] and
[ Manual].
AV Input (AV)
CAUTION
For safety reasons, video images cannot be
viewed while your vehicle is in motion. To view
video images, you must stop in a safe place and
apply the parking brake (refer to Parking brake in-
terlock on page 20).
Selecting AV as the source
% Touch [AV-1] or [AV-2] in the AV Source
screen.
= For details, refer to Selecting an AV source
on page 39.
p If you want to switch AV source, select
[ Video] in [AV1 Input] or [AV2 Input].
= For details, refer to Setting the video input
on page 139.
Using the AV Source (Pioneer AV Equipment)
En
130
Chapter
08