Pioneer SUPERTUNERD AVIC-N5 - Manual (Page 69)

Traffic flow information
When the map scale is between 0.02 mile
(25 m) to 0.75 mile (1 km), red, yellow, or green
blinking lines may appear on either side of a
road. These colors indicate the average speed
at which traffic is flowing along these streets.
Here is a guide to the colors and the average
speed they indicate:
The line for traffic flow
Flow Icon
Red: average speed in this area is between
5 mph to 15 mph (8 km/h to 24 km/h)
Yellow: average speed in this area is between
20 mph to 40 mph (32 km/h to 64 km/h)
Green: average speed in this area is 45 mph
(72 km/h) or faster (An icon without a number
indicates the average speed of the road is
more than 70 mph (112 km/h))
p In addition to these blinking lines, a round
icon with a number may appear on the
map. The number in the icon indicates the
actual average speed of that specific area.
p The flow icon appears only when the scale
on the map is 10 miles (20 km) or lower.
p You can turn off the use of Traffic flow infor-
mation.
= Refer to Set use of Traffic flow information
setting to off on the next page.
Checking traffic flow information on
the list
The traffic flow information on the route can
also be displayed as an onscreen list.
p The method for checking the traffic flow in-
formation displayed on the screen is the
same for
“Checking all traffic information”.
= Refer to Checking all traffic information on
page 66.
% Touch [Info/Traffic] in NAVI MENU, then
touch [Traffic Flow].
You can use
instead of in the traf-
fic events list screen. The list with the traffic
flow information is shown.
The list will be sorted according to the average
speed by touching
.
Selecting traffic information to
display
There are different types of traffic information
that can be received via the XM NavTraffic ser-
vice, and you can select which types will be in-
corporated and displayed on your navigation
system.
1 Touch [Info/Traffic] in NAVI MENU, and
then touch [Traffic Settings].
The icon for the traffic information currently
being displayed appears on the screen.
2 Touch [Change].
The names of the displayed traffic information
items and a list of icons appears on the
screen.
3 Touch the traffic information item to
display.
A red check appears next to the selected traf-
fic information.
p Touching [All] selects all the traffic informa-
tion.
Editing the Navigation Utilities
En
69
Chapter
05
Editing
the
Navigation
Utili
ties