Using the navigation system correctly, Handling the lcd screen 173, Liquid crystal display (lcd) – Pioneer SUPERTUNERD AVIC-N5 User Manual

Page 173: Screen, Appendix, Handling the lcd screen, Liquid crystal display (lcd) screen

Advertising
background image

! Despite our careful design of the product,

small scratches that do not affect actual
operation may appear on the disc surface
as a result of mechanical wear, ambient
conditions for use or handling of the disc.
This is not a sign of the malfunction of this
product. Consider it to be normal wear and
tear.

Using the Navigation
System Correctly

WARNING

! If liquid or foreign matter should get inside

this navigation system, park your vehicle to
safe place and turn the ignition switch off
(ACC OFF) immediately and consult your deal-
er or the nearest authorized Pioneer Service
Station. Do not use the navigation system in
this condition because doing so may result in
a fire, electric shock, or other failure.

! If you notice smoke, a strange noise or smell

from the navigation system, or any other ab-
normal signs on the LCD screen, turn off the
power immediately and consult your dealer or
the nearest authorized Pioneer Service Sta-
tion. Using this navigation system in this con-
dition may result in permanent damage to the
system.

! Do not disassemble or modify this navigation

system, as there are high-voltage components
inside which may cause an electric shock. Be
sure to consult your dealer or the nearest
authorized Pioneer Service Station for internal
inspection, adjustments or repairs.

Handling the LCD screen

! When the LCD screen is subjected to direct

sunlight for a long period of time, it will be-
come very hot, resulting in possible da-
mage to the LCD screen. When not using
this navigation system, avoid exposing it to
direct sunlight as much as possible.

! The LCD screen should be used within the

temperature ranges shown below:
— Operating temperature range: +14 °F to

+122 °F

— Storage temperature range: -4 °F to

+176 °F

! Do not use the LCD screen at temperatures

higher or lower than the operating tem-
perature range because the LCD screen
may not operate normally and the LCD
screen can be damaged.

! The LCD screen is exposed in order to in-

crease its visibility within the vehicle.
Please do not press strongly on it as this
may damage it.

! Do not push the LCD screen with excessive

force as this may scratch it.

! Never touch the LCD screen with anything

besides your finger when operating the
Touch Panel functions. The LCD screen can
scratch easily. (The stylus is supplied for
special calibrations. Do not use the stylus
for normal operation.)

Liquid crystal display (LCD) screen

! If the LCD screen is near the vent of an air

conditioner, make sure that air from the air
conditioner is not blowing on it. Heat from
the heater may break the LCD screen, and
cool air from the cooler may cause moist-
ure to form inside the navigation unit, re-
sulting in possible damage. Also, if the
LCD screen is cooled down by the air con-
ditioner, the LCD screen may become dark
or the life span of the small fluorescent
tube used in the LCD screen may be shor-
tened.

! Small black dots or white dots (bright dots)

may appear on the LCD screen. These are
due to the characteristics of the LCD
screen and do not indicate a problem with
the LCD screen.

! At low temperatures, the LCD screen may

be dark for a while after the power is turned
on.

Appendix

En

173

Appendix

Appendix

Advertising