Setting the automatic open, Function, Protecting your product from theft – Pioneer SUPERTUNERD AVIC-N5 User Manual

Page 33: Removing the front panel 33, Attaching the front panel 33, Basic operation, Setting the automatic open function, Removing the front panel, Attaching the front panel

Advertising
background image

1

Press and hold OPEN/CLOSE button.

Flap Setup screen appears.

2

Touch [Flap Set Back].

Touching [

Flap Set Back] switches between

[

On] and [Off].

Setting the automatic open
function

When you do not wish the display to open/
close automatically, you can set the automatic
open function to the manual mode.

1

Press and hold OPEN/CLOSE button.

Flap Setup screen appears.

2

Touch [Auto Flap].

Each touch of [

Auto Flap] changes the set-

tings as follows:

! Manual — You have to press OPEN/CLOSE

button to open/close the display

! Auto — The display automatically opens/

closes when power to navigation system is
turned on

Protecting Your Product
from Theft

The front panel can be detached from the dis-
play unit to discourage theft, as described
below.

CAUTION

! Never grip the display and the buttons tightly

or use force when removing or attaching.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

! After detaching the front panel, keep it in a

safe place so it is not scratched or damaged.

Removing the front panel

1

Press DETACH button to remove the

front panel.

2

Gently grip the right side of the front

panel and slowly pull it outward.
Take care not to drop the front panel and pro-
tect it from contact with water or other fluids
to prevent permanent damage.

3

Put the front panel into provided pro-

tective case for safe keeping.

Attaching the front panel

% Replace the front panel by holding it
upright to this product and clipping it se-
curely into the mounting hooks.

Basic Operation

En

33

Chapter

02

Basic

Operation

Advertising