Pioneer PDP-501MX - Manual (Page 29)

29
Special Installation (Hanging from wall)
Methods for Securing: Basic methods for securing are shown below.
Avoid blocking or covering areas, aside from those indicated by ( ). The method indicated
with cross-hatching should be avoided. Before attaching the unit to fittings, double-check that
the thickness and height of the fittings and the number of fixing bolts is correct. (Also refer to
3.4.1 Mounting to Fittings.)
Heated air is exhausted from the interior of the unit by fans. Before installation, consider the heat nesistance of the
wall or other surfaces behind the unit. Exhaust temperatures can be 30°C( C higher than the outside temperature.
For wall-mounting, bundle the cables so they don’t obstruct ventilation.
NOTE 1
NOTE 2
More than 700 mm
More than 700 mm