Pioneer PDP-501MX - Manual (Page 81)

81
Menu Mode
8) Setting the Colour System (For EURO models)
Normally the colour system is used in its AUTO mode. However, if no proper image or no colour is delivered, change
the mode, as follows.
1 Select SET UP. 2 Move the cursor to COLOUR SYS, and press the
SET button to change the setting.
Repeatedly pressing the SET button offers the
following options in sequence:
AUTO
= NTSC = PAL = SECAM = 4.43 NTSC
Screen 1 Screen 2
• Set-able condition: Composite signals incoming via INPUT 1
• Factory preset: AUTO
MAIN MENU
V MEMORY
SCREEN
RESET
AUTO POWER OFF
3SET UP
PICTURE
MENU : MENU OFF
5 : SEL.
SET : NEXT
SET UP
3COLOUR SYS : AUTO
EXIT
∞ : SEL. SET : CHANGE