Pioneer PDP-501MX - Manual (Page 98)

98
PC (Personal Computer) Sig.
VIDEO Sig.,
Component
Picture Quality Adjustment
Data for Use in Menu Mode
Reproduce
Picture Quality Picture Quality Adjustment Data
for Use in Integrator Mode
• CONTRAST
• BRIGHT
• COLOUR
• TINT (Note3)
• SHARP
• DETAIL
• R HIGH
• CONTRAST • R HIGH
• G HIGH
• B HIGH
• R LOW
• G LOW
• B LOW
[PC Sig. Picture Quality Adjustment Data 1]
[PC Sig. Picture Quality Adjustment Data 1]
[PC Sig. Picture Quality Adjustment Data 1]
[PC Sig. Picture Quality Adjustment Data 1]
[FACTORY]
[NTSC]
[PAL] (Note 1)
[SECAM] (Note 1)
[4.43 NTSC] (Note 1)
[FACTORY] INPUT 1
• BRIGHT
• COLOUR
• TINT
• SHARP
• DETAIL
• G HIGH
• B HIGH
• R LOW
• G LOW
• B LOW
[Component, Horiz. 15.6 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 31.3 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 15.7 kHz x Vert. 60 Hz]
[Component, Horiz. 31.5 kHz x Vert. 60 Hz]
[FACTORY]
• CONTRAST • R HIGH
• BRIGHT
• COLOUR
• TINT
• SHARP
• DETAIL
• G HIGH
• B HIGH
• R LOW
• G LOW
• B LOW
[Component, Horiz. 15.6 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 31.3 kHz x Vert. 50 Hz] (Note 1)
[Component, Horiz. 15.7 kHz x Vert. 60 Hz]
[Component, Horiz. 31.5 kHz x Vert. 60 Hz]
[Component, Horiz. 33.8 kHz x Vert. 60 Hz] (Note 2)
[Component, Horiz. 45.0 kHz x Vert. 60 Hz] (Note 2)
[FACTORY]
VIDEO Sig.,
RGB • CONTRAST • R HIGH
• BRIGHT • G HIGH
• B HIGH
• R LOW
• G LOW
• B LOW
• CONTRAST • R HIGH
• BRIGHT • G HIGH
• B HIGH
• R LOW
• G LOW
• B LOW
[RGB, Horiz. 15.6 kHz x Vert. 50 Hz] (Note 1)
[RGB, Horiz. 31.3 kHz x Vert. 50 Hz] (Note 1)
[RGB, Horiz. 15.7 kHz x Vert. 60 Hz]
[RGB, Horiz. 31.5 kHz x Vert. 60 Hz]
[RGB, Horiz. 33.8 kHz x Vert. 60 Hz] (Note 2)
[RGB, Horiz. 45.0 kHz x Vert. 60 Hz] (Note 2)
[FACTORY]
INPUT 2
Colour Mode 1
Colour Mode 2: Provides a separate memory area table having
the same structure as Colour Mode 1.
INPUT 3
CONTINUED ON THE NEXT PAGE
Integrator Mode
5.4.5 PICTURE and WHITE BALANCE parameter memory area table
The FACTORY area is a read-only memory.
Note 1: EURO models only.
Note 2: U.S models and TAIWAN models only.
Note 3: TINT not adjustable while in PAL or SECAM positions.