Pioneer PDP-501MX - Manual (Page 56)

56
Speaker System: PDP-S02-LR
4.6.3 Mounting with the plasma display ceiling-suspension hardware (PDK-5002)
Monitor mount bolt
Hole rivet
Figure 2
When mounting the plasma display with the optional speakers to the ceiling-suspension hardware, first attach the
speakers to the display with monitor mount bolts, as shown in Figure 2. Next, referring to Figure 3, use the upper left
and right monitor mount bolts, which are not used for mounting the speaker system, to fasten the ceiling-suspension
hardware to the display using the washers (25 mm in outside diameter) supplied with the optional speaker.
Follow the normal mounting procedure to attach the mounting hardware to the display.
Mounting the optional speakers to the display makes it difficult to access the monitor mount bolts. Take care while
performing mounting work.
Monitor mount bolt