Pioneer PDP-501MX - Manual (Page 65)

65
A A
A
A
A
Before Beginning Adjustments
3) About Screen Size
1 Screen size when video signals are received: Refer to the operating manual.
2 Screen size when PC signals are received:
• ORIGINAL
Images are reproduced with the input signal’s dot and
line numbers corresponding to the unit’s dot and line num-
bers at a 1-to-1 ratio. “dot and line” represents screen
size or display area. Input signals are reproduced with the
highest possible fidelity.
Screen Example:
When inputting a
640 x 480 signal =
• 4:3 NORMAL
Enables reproduction of input signals in full width, pre-
serving the original aspect (vertical-to-horizontal ratio).
Screen Example: When inputting a 640 x 480 signal =
• FULL
Enables reproduction of input signals in full width on a
16-to-9 ratio screen.
Screen Example: When inputting a 640 x 480 signal =
• ZOOM
Enabled only for 1280 x 1024 signals. Reproduction is
made with the input signal’s dot and line numbers corre-
sponding to those of the unit at a 1-to-1 ratio, but the top
or the bottom of the image will not be visible, as shown.
(Vertical scrolling is available with “V.POSI.” in Menu
mode.)
NOTE: The figures are for illustrative purposes only.
1280 dots
1280 dots
1280 dots
1280 dots
768 lines
768 lines
768 lines
768 lines
640 dots
1024 dots
1024 lines
Original image
Screen
480 lines
Image
reproduced