NEC LT240 - Manual (Page 103)

E-103
USING ON-SCREEN MENU
Ͼ
Menu Descriptions & Functions
Automatic ........ Automatically assigns an IP address to the projector
from a DHCP server.
Manual ............ Provides a space for you to register the IP address or
subnet mask number obtained from your network ad-
ministrator.
IP Address ...... Set your IP address. Press to display the software
keyboard and type in 12 numeric characters.
Subnet Mask ... Set your subnet mask number. Press to display the
software keyboard and type in 12 numeric characters.
Projector Name
........................ Specify a unique projector name. Press to display
the software keyboard and type in. Up to 16 alphanu-
meric characters can be used.
Gateway .......... Set the default gateway of the network connected to
the projector. Press to display the software keyboard
and type in 12 numeric characters.
Checking this box will make the set default route valid.
When data is sent from the LAN card, the transfer lo-
cation will be searched according to the previously set
routing information; however, when the transfer loca-
tion has not been found as a result of the search, the
data will be sent to the device that holds the IP ad-
dress set here. The IP address that is set here must be
one that can be identified by a search of the routing
information.
DNS Configuration
........................ Type in the IP address of DNS server on the network
connected to the projector. 12 numeric characters are
used.
Domain Name . Type in domain name of the network connected to the
projector. Up to 60 alphanumeric characters can be
used.