NEC LT240 - Manual (Page 87)

E-87
USING ON-SCREEN MENU
Ͼ
Menu Descriptions & Functions
Input
Signal
Screen
Type
4:3 Screen
16:9 Screen
4:3
4:3
4:3 Window 4:3 Fill
Letter Box
Letter Box
Letter Box
Squeeze
Wide Screen Crop
Wide Screen
NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available.
Should this happen, first reset the 3D Reform data and then do setting again.
Second repeat the 3D Reform adjustment.
Changing the aspect ratio can limit 3D Reform in its adjustable range.
Masking Unwanted Area (Blanking)
This feature allows you to mask any unwanted area of the screen im-
age.
NOTE: Adjustment of vertical display range
Adjust the Top, Bottom, Left or Right blanking with the SELECT
̇ or ̈ button.
Adjusting Position and Clock
This allows you to manually adjust the image horizontally and verti-
cally, and adjust Clock and Phase.
Horizontal/Vertical Position:
........................ Adjusts the image location horizontally and vertically
using the SELECT
̇
and
̈
buttons. This adjustment
is made automatically when the Auto Adjust is turned
on. See "Auto Adjust" on page E-98 for turning on or
off the Auto Adjust feature.