To connect scart output (rgb), Installation and connections, Making connections – NEC LT240 User Manual
Page 29: E-29
E-29
INSTALLATION AND CONNECTIONS
Ͼ
Making Connections
To connect SCART output (RGB)
Before connections: An exclusive SCART adapter (ADP-SC1) and a com-
mercially available SCART cable are required for this connection.
NOTE:
•
Audio signal is not available for this connection.
•
The RGB IN 2 connector does not support SCART signal and Plug & Play.
SE
LE
CT
C
N
A
C
EL
TE
R
N E
E
M
NU
SO
UR
CE
AU
TO
A
DJU
ST
ON
S
TA
ND
B
Y
ST
AT
US
PO
WE
R
LA
MP
AL
IG
NM
EN
T
PC
-C
AR
D
Video equipment
such as DVD player
Projector
ADP-SC1
Commercially available SCART cable
Female
1. Turn off the power to the projector and your video equipment.
2. Use the NEC ADP-SC1 SCART adapter and a commercially available
SCART cable to connect the RGB 1 input of your projector and a SCART
output (RGB) of your video equipment.
3. Turn on the power to the projector and your video equipment.
4. Use the RGB 1 button on the remote control to select the RGB 1 input.
5. Press the MENU button on the remote control to display the menu.
6. From the Advanced menu, select [Projector Options]
→
[Setup]
→
[Page
3]
→
[Signal Select RGB1]
→
[Scart].
SCART is a standard European audio-visual connector for TVs, VCRs
and DVD players. It is also referred to as Euro-connector.
NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in
Europe. Contact your NEC dealer in Europe for more information.
To RGB IN 1