NEC LT240 - Manual (Page 46)

E-46
4. Use the SELECT
̆̄̇̈ button to select one icon which points in the
direction you wish to move the projected image frame.
PROJECTING AN IMAGE
Screen
5. Press the ENTER button.
6. Use the SELECT
̆̄̇̈ button to move the projected image frame as
shown on the example.
7. Press the ENTER button.
Screen
8. Use the SELECT
̆̄̇̈ button to select another icon which points in
the direction.
Screen
The confirmation screen is displayed.
On the Cornerstone adjustment screen,
select “Exit” and then “OK”, or press the
CANCEL button on the remote control.