NEC LT240 - Manual (Page 54)

E-54
• When the MENU button is pressed, the PJ button lights red to indi-
cate that you are in the Projector mode, which allows the projector
menu operation using the three buttons.
• When the POINTER button is pressed, the PJ button lights red to
indicate that you are in the Projector mode and that the SELECT
̆̄̇̈
button works as a moving button for the POINTER or magni-
fied image.
• If no buttons are pressed within 60 seconds, the PJ button's light
goes out to indicate that you are in the Computer mode. To enable
the projector menu operation again, press the PJ button to light red.
To move the pointer or a magnified image again, turn off the pointer
and then turn on the pointer (press the POINTER button two times).
• When the PJ button is lit, if you want to use the mouse function im-
mediately, press the PJ button to return to the Computer mode (not
lit).
During Computer mode:
In Computer mode, by pressing the ENTER button for 2 seconds or more
then releasing, the drag mode is set and the drag operation can be per-
formed simply by pressing the SELECT
̆̄̇̈
(mouse) button. To cancel
the drag mode, press the ENTER (left click) button again or press the
CANCEL (right click) button.
CONVENIENT FEATURES
Ͼ
Using the Remote Mouse Function