NEC LT240 - Manual (Page 68)

E-68
NOTE: You can also use the
̇ and ̈ button on the remote control to select
folders or slides.
If you use the
̇ and ̈ button on the remote control for Viewer operation, press
the PJ button to switch to the Projector mode and the PJ button lights red.
USING THE VIEWER
Lit red
Works as the Select button
on the projector.
E
N
TE
R
CA
NC
E
L
SELECT
PJ
Auto Play Mode
If the "Auto Play" option is selected in "Viewer Options" of the menu, any
given slide will start to play automatically.
You can also specify Auto Play Interval between 5 and 300 seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the picture
of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides
and moving pictures from a VCR, etc., it is possible to switch from a
Viewer slide to the video picture then back to the Viewer slide simply by
using the Viewer button.
NOTE: Even if you switch the current Viewer source to another source, the cur-
rent slide is retained. When you return back to the Viewer, you will get the slide
that has been retained.
The PC card editing operation cannot be performed from the projector. Do so
using the Dynamic Image Utility 2.0 software.