NEC LT240 - Manual (Page 84)

E-84
Input Terminal: Change the input terminal. RGB1 and RGB2 are avail-
able for RGB signal; Video and S-Video are available for composite
signal.
Source List: Set signal selection method.
Lock: Set so that the selected signal cannot be deleted when "All De-
lete" is executed.
Skip: Set so that the selected signal will be skipped during auto search.
When complete, select OK and press ENTER. To exit without storing set-
ting, select Cancel. Select "Source Name" and press ENTER to display
the Source Name Edit window. You can change source name on this win-
dow. Press [
̄
] to display the software keyboard, which you can enter al-
phanumeric characters. See page E-134 for the key function of the soft-
ware keyboard.
The following buttons are not available for the currently projecting signals:
1) The Cut and Paste buttons on the Entry Edit Command screen
2) The Input Terminal button on the Entry Edit screen
All Delete: This feature enables you to delete all the registered signals
in the Entry List.
NOTE: When all the signals in the Entry List are deleted, the currently pro-
jected signal will be also deleted except locked signals.
Select "Input Terminal" and press ENTER to display the Input Termi-
nal window.
USING ON-SCREEN MENU
Ͼ
Menu Descriptions & Functions