NEC LT240 - Manual (Page 9)

E-9
INTRODUCTION
Ͼ
Part Names of the Projector
Ͼ
Top Features
4. SOURCE Button
Use this button to select a video source such as a PC, VCR, DVD
player, Viewer (PC card), or LAN.
Press and release this button quickly to display the Source List.
Each time this button is pressed for a minimum of TWO seconds, the
input source will change as follows:
RGB1
→
RGB2
→
Video
→
S-Video
→
Viewer
→
RGB1
→
...
If no input signal is present, the input will be skipped.
5. AUTO ADJUST Button
Use this button to adjust Position-H/V and Pixel Clock/Phase for an
optimal picture. Some signals may not be displayed correctly or take
time to switch between sources.
6. PC CARD Access Indicator
Lights while accessing a PC card.
7. ENTER Button
Executes your menu selection and activates items selected from the
menu.
8. CANCEL Button
Press this button to exit "Menus". Press this button to return the adjust-
ments to the last condition while you are in the adjustment or setting
menu.
9. SELECT
̆̄̇̈
(+) (–) / Volume Buttons
̆̄
: Use these buttons to select the menu of the item you wish to
adjust. When no menus appear, these buttons work as a volume
control.