NEC WT600 - Manual (Page 43)

6-6
6-4. Entering Alphanumeric Charac-
ters by Using the Menu
Alphabet or numeric characters are used for your IP address or
projector name. To enter IP Address or projector name, use the
software keyboard.
For using the software keyboard, see page 10-5.
6-5. Menu Descriptions & Functions
Source Select
Selecting a Source
Enables you to select a video source such as a VCR, DVD player,
laser disc player, computer or document camera depending on
what is connected to your inputs. Press the SELECT
̆̄ button
on the projector cabinet or on your remote control to highlight
the menu for the source you want to project.
RGB
Selects the computer connected to your RGB or component sig-
nal.
NOTE: An optional component cable (Component V or ADP-CV1 cable)
is needed for a component signal.
Video
Selects what is connected to your Video input-VCR, laser disc
player, DVD player or document camera.
S-Video
Selects what is connected to your S-Video input-VCR, DVD
player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is
played back in fast-forward or fast-rewind with a Video or S-Video
source.
DVI (DIGITAL/ANALOG)
Selects the computer connected to the DVI input connector.
Viewer
This feature enables you to make presentations using a PC card
that contains captured images and slides created with the ex-
clusive Dynamic Image Utility 2.0 contained in the CD-ROM.
See the supplied Software Utility Installation Guide for installing
the Dynamic Image Utility 2.0. The starting screen for the Viewer
varies depending on the settings of the Setup's Page 2. See
Setup on page 6-15.
NOTE: Even if you switch the current Viewer source to another source,
the current slide is retained. When you return back to the Viewer, you
will get the slide that has been retained. A launcher will appear when
you press the MENU button.
A press of the MENU button displays the toolbar; a press of the
MENU button again displays the Menu and hereafter each press
of the MENU button switches displaying between the Menu and
the toolbar.
The launcher is a tool bar including the following buttons:
Drag
Prev Play Jump Drive
View Next Stop Select
Delete
Setup
Drag ................ Drags to move the tool bar. (for USB mouse op-
eration only)
Prev ................. Returns to the previous slide or folder.
Next ................. Advances to the next slide or folder.
Play ................. Plays back automatically or manually depend-
ing on the setting on Viewer Options of the menu.
This allows you to move on to the next slide when
"Manual Play" is selected.
Stop ................. Stops Auto Play while you are playing back and
to resume playing from the selected slide or
folder when "Auto Play" is selected.
Jump ............... Displays a list of slides while you are playing
back.
Select .............. Displays a list of folders while you are playing
back.
Drive ................ Switches between PC Card slot or USB memory.
Setup ............... Displays the Viewer Options dialog box on Page
2 of the Setup dialog box.
Delete .............. Deletes a captured slide(s) or all the captured
slides in the selected folder.
View ................ Hides the tool bar while you are playing back.
Clicking with the right button of a mouse shows
it again.
Provides access to controls for your image. Use
the SELECT button on the projector cabinet or
the remote control to highlight the menu for the
item you want to adjust.
LAN
Selects a signal from a LAN card plugged into the projector's
card slot.
6. Using On-Screen Menu