NEC WT600 - Manual (Page 75)

10-7
Picture: Controls the video adjustment of the projector.
Brightness ̆ ......... Increments the brightness adjustment
value.
Brightness ̄ ......... Decrements the brightness adjustment
value.
Contrast ̆ ............ Increments the contrast adjustment
value.
Contrast
̄ ............ Decrements the contrast adjustment
value.
Color ̆ ................. Increments the color adjustment value.
Color ̄ ................. Decrements the color adjustment value.
Hue
̆ ................... Increments the hue adjustment value.
Hue
̄ ................... Decrements the hue adjustment value.
Sharpness ̆ ........ Increments the sharpness adjustment
value.
Sharpness ̄ ........ Decrements the sharpness adjustment
value.
* The functions that can be controlled will vary depending on
the signal being input to the projector.
Source Select: This switches the input connector of the projec-
tor.
RGB ...................... Switches to the RGB connector.
DVI (ANALOG) ...... Switches to the DVI-I connector.
DVI (DIGITAL) ....... Switches to the DVI-I connector.
Video .................... Switches to the Video connector.
S-Video ................. Switches to the S-Video connector.
Viewer ................... Switches to the Viewer.
LAN ....................... Switches to a LAN signal.
Projector Status: This displays the condition of the projector.
Remaining Lamp Time ............ Displays the remaining life of
the lamp as a percentage.
Lamp Hour Meter ............... Displays how many hours the
lamp has been used.
Projector Usage ................. Displays how many hours the
projector has been used.
Error Status ....................... Displays the status of errors
occurring within the projector.
Refresh .............................. Updates the display of the fol-
lowing conditions.
10. Appendix