NEC WT600 User Manual
Page 57
6-20
Key1-4:
Enter encryption key when selecting [64bit] or [128bit] in [WEP].
Up to 5 characters can be set in 64 bit and up to 13 charac-
ters in 128 bit. Press the “HEX” button in the Software key-
board to change to “ASCII” to set the key in ASCII digit. You
can toggle this button between “ASCII” and “HEX”.
When setting the key in hexadecimal digit:
* The “0x (numberal and alphabet respectively) appears
automatically right in front of your key code.
* Hexadecimal uses 0 to 9 and A to F.
* Up to 10 characters can be set in 64 bit and up to 26
characters in 128 bit.
NOTE: To the Mail Alert feature on wireless LAN connection, select
"Infrastructure" for "Mode" in "Network Type." "Test Mail" is available
only when there is a LAN card in the PC card slot of the projector.
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-
mail when using wireless or wired LAN. The error message
will be notified when the projector lamp has reached the end
of its usable life or an error occurs in the projector.
Sample of a message sent from the projector:
The lamp is at the end of its usable life. Please replace the
lamp.
Projector Name: X X X X
Lamp Hour Meter: xxxx [H]
Projector Usage: xxxxxx [H]
Sender's Address:
Specify the senders address. Use the Software keyboard. Up
to 60 alphanumeric and symbols characters can be used. See
"Using Software Keyboard" in Appendix for more details.
SMTP Server Name:
Type in the SMTP server name to be connected to the projec-
tor. Up to 60 alphanumeric characters can be used.
Recipient's Address 1 to 3:
Type in your recipient's address. Up to 60 alphanumeric and
symbols characters can be used.
Test Mail:
Send a test mail to check if your settings are correct.
NOTE: If you entered an incorrect address in a test, you may not
receive an Alert mail. Should this happen, check if the Recipient's
Address is correctly set.
NOTE: Unless any one of the "Sender's Address", "SMTP Server's
Name" or "Recipient's Address 1-3" is selected, "Test Mail" is not avail-
able.
NOTE: Be sure to highlight “OK” and press the ENTER button before
executing “Test Mail”.
6. Using On-Screen Menu