NEC WT600 - Manual (Page 67)

9-1
This section provides technical information about the WT600 Projector's performance
Model Number WT600
Optical
DMD Single Chip Digital Micromirror Device (DMD)
Resolution 1024 ן 768 pixels* up to UXGA (up to SXGA for digital signal) with Advanced AccuBlend
Mirror Aspherical mirror ן 4
Lamp 220 W DC standard (176W Eco mode)
Image Size 40" - 100" (1.0 m - 2.5 m) diagonal
Projection Distance 2.52" - 25.94" / 64 mm - 659 mm
Projection Angle 55°
Electrical
Inputs 1 RGB, 1 DVI-I , 1 S-Video, 1 Video, 1 PC Card, 2 Stereo Mini Audio,
1 (L/R) RCA Audio, 1 PC Control, 1 Remote Control
Outputs 1 RGB, 1 Stereo Mini Audio
USB Port 1 A Type, 1 B Type
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM,
HDTV:1080i, 720p, 480p, 480i (w/optional cable)
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz
Video Bandwidth RGB: 100 MHz (-3dB)
Pixel Clock Freq Less than 135 MHz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL / YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H)
ן 768 dots (V)
External Control RS232, IR, LAN (optional)
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speakers 5 cm ן 7 cm Oval type (ן 2)
Sound Output Power 1W ן 2
Power Requirement 100 - 120V AC / 200 - 240V AC, 50 / 60 Hz
Input Current 3.2A (100 - 120V AC) / 1.6A (200 - 240V AC)
Power Consumption 290W (0.6W at Standby)
* Effective pixels are more than 99.99%.
9. Specification