NEC WT600 - Manual (Page 58)

6-21
Status
Displays the status of the LAN settings.
IP Address ............... Indicates the IP address of the projec-
tor.
Subnet Mask ........... Indicates the subnet mask of the pro-
jector.
Gateway .................. Indicates the gateway of the network
connected to the projector.
MAC Address .......... Indicates the MAC address of the LAN
card.
Reconnect ............... Use this button to connect the projector
to a network.
DHCP
Depending on your network environment, acquiring an IP ad-
dress from a DHCP server may not be possible.
Should this happen, consult your network administrator to make
changes to the following settings.
Host Name option
Select whether or not to add option hostname for DHCP.
None ........................ Not add
Request ................... Add at the time of DHCP_REQUEST.
Discover/Request .... Add at the time of DHCP_DISCOVER
and DHCP_REQUEST.
Host Name
Type in a hostname. This field is available only when “Re-
quest” or “Discover/Request.”
Client-identifier option
Select whether or not to add option client identifier for DHCP.
None ........................ Not add
Request ................... Add at the time of DHCP_REQUEST.
Discover/Request .... Add at the time of DHCP_DISCOVER
and DHCP_REQUEST.
Use MAC address
Turn on to use MAC address for Client-identifier.
Client-identifier
Type in a client identifier.
6. Using On-Screen Menu